주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

7 단계
Slide the flat end of a spudger under the headphone jack ribbon cable to separate it from the adhesive holding it to the rear case. Slide the flat end of a spudger under the headphone jack ribbon cable to separate it from the adhesive holding it to the rear case. Slide the flat end of a spudger under the headphone jack ribbon cable to separate it from the adhesive holding it to the rear case.
  • Slide the flat end of a spudger under the headphone jack ribbon cable to separate it from the adhesive holding it to the rear case.

スパッジャーの平面側先端をヘッドホンジャックリボンケーブルの下にスライドさせて、リボンケーブルをリアケースに留めている接着剤から外します。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.