주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

영어
스페인어
3 단계
Disconnect the eight indicated connectors by placing a spudger beneath the wired side of each one and lifting up.
  • Disconnect the eight indicated connectors by placing a spudger beneath the wired side of each one and lifting up.

  • Use care when disconnecting some of the smaller connectors. A forceful prod with the spudger may accidentally break them off the logic board.

Desconecta los ocho conectores indicados colocando un spudger debajo de cada uno y levantándolos.

Ten cuidado al desconectar algunos de los conectores más pequeños. Un golpe fuerte con el spudger puede romperlos accidentalmente de la placa lógica.

-[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one and lifting up.
+[* black] Disconnect the eight indicated connectors by placing a spudger beneath the wired side of each one and lifting up.
[* icon_caution] Use care when disconnecting some of the smaller connectors. A forceful prod with the spudger may accidentally break them off the logic board.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.