주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 8개에 영향을 미칩니다.

영어
스페인어
9 단계
Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the left fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the left fan up. Place the left fan above the Airport card. It is not necessary to remove the fan from the computer entirely.
  • Hold the logic board down with one hand and use your other hand to lift the left fan up from its housing. There is a piece of black tape securing the left fan to the heat sink. Carefully peel this tape up from the heat sink as you lift the left fan up.

  • Place the left fan above the Airport card. It is not necessary to remove the fan from the computer entirely.

  • Lift the right fan up and carefully peel up the tape securing the fan to the heat sink as you go.

  • Remove the right fan from the computer.

Mantén la placa lógica hacia abajo con una mano y usa tu otra mano para levantar el ventilador izquierdo de su alojamiento. Hay una cinta negra que asegura el ventilador izquierdo al disipador de calor. Con cuidado, retira esta cinta del disipador de calor mientras levantas el ventilador izquierdo.

Coloca el ventilador izquierdo sobre la tarjeta Airport. No es necesario quitar el ventilador del ordenador por completo.

Levanta el ventilador derecho y despega cuidadosamente la cinta que asegura el ventilador al disipador de calor a medida que avanzas.

Retira el ventilador derecho de la computadora.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.