주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 20개에 영향을 미칩니다.

3 단계
Use a plastic opening tool to gently pry up the battery connector from its socket on the logic board. Place the tip of the tool between the loudspeaker enclosure and the metal cover of the connector, and lift the bottom edge of the connector first. The battery connector comes off vertically from the logic board. Do not apply force sideways.
  • Use a plastic opening tool to gently pry up the battery connector from its socket on the logic board.

  • Place the tip of the tool between the loudspeaker enclosure and the metal cover of the connector, and lift the bottom edge of the connector first.

  • The battery connector comes off vertically from the logic board. Do not apply force sideways.

  • Be careful not to pry at the battery connector socket itself, or it may detach from the logic board. There are four very small solder points awaiting this mistake!

使用塑料Opening工具断开电池连接座。

将工具的尖端放置在扬声器外壳和连接器的金属盖之间,然后先撬起连接座边缘。

电池接头可以垂直从主板上撬下来。不要从侧面用力。

请小心,不要扯掉电池连接座与主板上的焊接点。那儿有4个非常小的焊接点“等待”你犯这个错误!

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.