주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 14개에 영향을 미칩니다.

영어
프랑스어

4 단계 번역 중

4 단계
Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board. Be careful not to break any components off the surrounding area on the logic board as you pry upwards.
  • Use the edge of a plastic opening tool to pry the rear camera connector up from its socket on the logic board.

  • Be careful not to break any components off the surrounding area on the logic board as you pry upwards.

  • Remove the rear camera from the iPhone.

  • There is a small rubber gasket that sits underneath the rear-facing camera. Make sure that it is properly seated before reassembly.

Utilisez un outil en plastique pour soulever le connecteur de la caméra arrière de sa prise sur la carte mère.

Faites très attention de ne pas endommager d'autres composants sur la carte mère pendant que vous faites levier.

Retirez la caméra arrière de l'iPhone.

Il y a un petit joint en caoutchouc sous la caméra arrière. Veillez à ce qu'il soit correctement remis avant le remontage.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.