주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 19개에 영향을 미칩니다.

2 단계 번역 중

2 단계
The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way. Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.
  • The front panel ribbon cables are connected beneath the LCD. To access them, you'll need to temporarily flip the LCD over and out of the way.

  • Be very careful when moving the LCD, and do not attempt to remove it from the iPad—its display data cable will remain connected while it is rotated over.

  • Lift the LCD from its long edge closest to the volume buttons and gently flip it out of the rear case—like turning the page in a book.

  • Set the LCD face down on the front panel.

Die Flachbandkabel des Front Panels sind unterhalb des LCDs miteinander verbunden. Um Zugang zu bekommen, musst du das LCD aus dem Weg klappen.

Sei sehr vorsichtig, wenn du das LCD bewegst und versuche nicht, es vom iPad zu entferne — sein Displaydatenkabel bleibt angeschlossen, wenn es umgeklappt wird.

Hebe das LCD entlang der Längsseite der Lautsprechertasen und klappe es vorsichtig aus dem hinteren Gehäuse heraus—so wie das Umblättern einer Buchseite.

Lege das LCD umgekehrt auf das Front Panel.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.