주요 콘텐츠로 건너뛰기

MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement

1 단계 번역중

1 단계
MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement: 0 단계, 이미지 2개 중 1개 MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement: 0 단계, 이미지 2개 중 2개
  • At the bottom right corner of the screen, insert the pointed side of spudger between the bezel and wide, flat part of rubber bumper. Pull the bumper towards to hinge to release the adhesive.

  • Then place the flat side of the spudger between bezel and bumper at the same location, slip the spudger underneath the bumper and lift.

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.