주요 콘텐츠로 건너뛰기

MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement

11 단계
MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement: 0 단계, 이미지 2개 중 1개 MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement: 0 단계, 이미지 2개 중 2개
  • Get the 12x12 sheet of 3M 4905 VHB Tape, place it on the table, red adhesive backing up, with the overhanging white adhesive backing on the top and bottom.

  • With a ruler, measure and mark 3mm from the right edge at the top and bottom of the 4905 sheet.

  • Some of the precut adhesives available for the glossy screen have failed with the aluminum bezel. 3M 4905 appears to be what Apple is using here, and it works.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.