주요 콘텐츠로 건너뛰기

MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement

15 단계
MacBook Pro 15" Unibody Mid 2010 Matte Finish LCD Replacement: 0 단계, 이미지 1개 중 1개
  • On the display assembly, apply the 6mm x 230mm strips, red side up, to the flange between the bumper and screen on the left and right sides.

  • Tip: Unpeel about an inch of the white backing from the adhesive and fold the backing to the side. Apply this exposed adhesive carefully to the lower corner. Then, with the rest of the white backing on the adhesive, locate the position of the upper corner. Hold that position with one hand while peeling the backing off with the other.

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.