17 단계 번역중
17 단계
-
Tooling holes on the left and right upper corners.
-
Camera.
-
EMI Pad
-
On the flange of the display assembly:
-
Apply the 6mm x 120mm strip, red side up, to the area on the flange between the EMI pad and the adhesive strip on the left side.
-
Apply the 6mm x 30mm strip, red side up, to the area on the flange between the EMI pad and the camera.
-
Apply the 6mm x 155mm strip, red side up, to the area on the flange between the camer and the adhesive strip on the right side.
귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.