Hot Tools HPK12 Thermal Fuse Replacement

영어

한국어

3 단계 번역중

3 단계

Locate thermal fuse then remove it with the spudger and cutting tool by cutting the wire on either end.
After removal of the fuse, place the new HPK12 Thermal Fuse in the socket and solder the wires to their intended locations.
This is an extremely difficult and dangerous step and should only be done by someone comfortable soldering. If comfortable, carefully review this soldering guide to ensure proper procedures are followed to prevent injury or destruction of device.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.