주요 콘텐츠로 건너뛰기
4 단계
Use a coffee filter or a lint-free cloth with a drop of ArctiClean Thermal Material Remover to clean the thermal paste residue off the thermal contact surface of your heat sink. Once the surface is clean, use a new coffee filter or cloth to apply a drop of ArctiClean Thermal Surface Purifier to remove any oils and prepare the surface.
  • Use a coffee filter or a lint-free cloth with a drop of ArctiClean Thermal Material Remover to clean the thermal paste residue off the thermal contact surface of your heat sink.

  • Once the surface is clean, use a new coffee filter or cloth to apply a drop of ArctiClean Thermal Surface Purifier to remove any oils and prepare the surface.

  • Do not touch either the chip or the heatsink, or allow any dust or debris to get on them. Even a fingerprint can be a major obstacle to thermal transfer on a chip.

  • Allow the heat sink(s) to dry completely!

用一张咖啡滤纸或无纺布沾取一滴ArctiClean1号散热材料移除剂,来将残留在与散热片接触表面上的散热膏清理干净。

当该表面干净后,再次使用一张咖啡滤纸或无纺布沾取一滴ArctiClean2号散热器表面净化剂,来擦除表面的油质。

请勿直接接触芯片或散热片,或者让任何灰尘或碎屑落在表面。 即使指纹也可能阻碍芯片的热传递。

让散热器完全晾干。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.