주요 콘텐츠로 건너뛰기

7 단계 번역 중

7 단계
To apply new thermal paste, use the application method recommended for your specific processor type—vertical line, horizontal line, middle dot, or surface spread.
  • To apply new thermal paste, use the application method recommended for your specific processor type—vertical line, horizontal line, middle dot, or surface spread.

  • If you're using the surface spread method:

  • Wrap the tip of your index finger with a piece of plastic (such as a sandwich bag or Saran wrap).

  • Dispense a very small amount of thermal paste onto processor core(s).

  • Use your finger to gently smear the thermal paste over the entire processor core(s).

  • If you accidentally apply a small amount of thermal paste on the green surface of the processor, it will not cause any harm.

  • The processor(s) is now ready for heat sink installation.

  • You do not need to apply any thermal paste on the heat sink(s), although Arctic Silver gives instructions on "tinting" the heat sink to reduce the break-in time of the thermal compound.

根据您的处理器型号来选择涂抹散热硅脂的方法——水平涂抹,竖直涂抹,中点涂抹或散开涂抹。

如果您使用散开涂抹的方式:

用一块塑料(如塑料袋或一次性手套)包裹食指的尖端。

在处理器中心上点少量的散热膏。

使用手指轻轻涂抹整个处理器核心上的散热膏。

如果您不小心在处理器的绿色表面上涂了少量散热膏,不要担心,它不会造成任何伤害。

处理器现在处理好,可以安装散热片了。

您不需要在散热片上涂抹任何热敏膏,尽管Arctic Silver的说明是要给散热器“刷散热膏”,以缩短散热膏贴附的时间。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.