주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

영어
이탈리아어
2 단계
There are 5 ribbon cables connected to the motherboard. Two of these cables are clipped on and one is soldered on. Remove the 4 ribbon cables you can clip off using the plastic spudger. For large ribbon cable use plastic spudger or your fingers to release ribbon cable clip by pulling the black edges down and pulling ribbon cable out. For ribbon cable on the left side, flip up black hinge to remove ribbon cable
  • There are 5 ribbon cables connected to the motherboard. Two of these cables are clipped on and one is soldered on. Remove the 4 ribbon cables you can clip off using the plastic spudger.

  • For large ribbon cable use plastic spudger or your fingers to release ribbon cable clip by pulling the black edges down and pulling ribbon cable out.

  • For ribbon cable on the left side, flip up black hinge to remove ribbon cable

  • Desolder fifth ribbon cable with soldering station.

  • If soldering is new for you, then follow this useful guide on soldering and desoldering connections.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.