기기를 수리하세요

수리할 권리

상점

안내서로 돌아가기
영어
일본어
2 단계
There are a total of 8 screws that will need to be removed for this project. 6 external and 2 internal. Use your #1 screwdriver to remove the 6 external screws and remove the back plate of the controller. Remove the 2 internal screws and remove the controller board.
Disassemble the Controller

  • There are a total of 8 screws that will need to be removed for this project. 6 external and 2 internal.

  • Use your #1 screwdriver to remove the 6 external screws and remove the back plate of the controller.

  • Remove the 2 internal screws and remove the controller board.

  • Remove the 3 rubber pads and all the buttons from the front controller cover and controller board and set them off to the side for now.

  • I put the 8 screws in a container with enough rubbing alcohol to submerge them. This removes years of dirt and they come out looking like new. This is completely optional.

제목 추가

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.