주요 콘텐츠로 건너뛰기

iPhone 7 디스플레이 어셈블리 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 21 안내서에 영향을 미칩니다.

2 단계
iPhone 7 Display Assembly Replacement: 0 단계, 이미지 3개 중 1개 iPhone 7 Display Assembly Replacement: 0 단계, 이미지 3개 중 2개 iPhone 7 Display Assembly Replacement: 0 단계, 이미지 3개 중 3개
  • Remove the two 1.3 mm Phillips #000 screws securing the bracket over the front panel sensor assembly connector.

  • Some phones could be Y000. Apple started using Y000 for these at some point in the middle of the product's lifecycle.

전면 패널 센서 어셈블리 커넥터 위로 브래킷을 고정하는 1.3mm Phillips/십자 나사 두 개를 풀어주세요.

브래킷을 분리하세요.

-[* red] Remove the two 1.3 mm Phillips screws securing the bracket over the front panel sensor assembly connector.
-[* black] Remove the bracket.
+[* red] Remove the two 1.3 mm Phillips #000 screws securing the bracket over the front panel sensor assembly connector.
+ [* icon_note] Some phones could be Y000. Apple started using Y000 for these at some point in the middle of the product's lifecycle.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.