주요 콘텐츠로 건너뛰기

iPhone 7 디스플레이 어셈블리 교체

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 21 안내서에 영향을 미칩니다.

3 단계
iPhone 7 Display Assembly Replacement: 0 단계, 이미지 2개 중 1개 iPhone 7 Display Assembly Replacement: 0 단계, 이미지 2개 중 2개
  • Disconnect the front panel sensor assembly connector from its socket on the logic board.

  • This press connector should also be reconnected one end at a time to minimize the risk of bending.

로직 보드 소켓에서 전면 패널 센서 어셈블리 커넥터를 분리하세요.

이 프레스 커넥터를 다시 연결할 때 구부러지는 위험을 최소화하기 위해 한 번에 한쪽 끝씩 연결하세요.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.