주요 콘텐츠로 건너뛰기

MacBook Air 13 "Reemplazo del Trackpad de finales de 2010

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 3개에 영향을 미칩니다.

영어
스페인어
5 단계
MacBook Air 13" Late 2010 Trackpad Replacement: 0 단계, 이미지 1개 중 1개
  • Remove the 1.4 mm T5 Torx set screw from its tapped hole near the front edge of the upper case.

  • During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.

Retire el tornillo de ajuste Torx T5 de 1,4 mm de su orificio roscado cerca del borde frontal de la carcasa superior.

Durante el reensamblaje, no apriete demasiado el tornillo de ajuste, ya que el botón dejará de hacer clic en un punto determinado. Ajuste el tornillo de ajuste hasta que el lado móvil del trackpad tenga un juego mínimo.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.