주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

1 단계 번역 중

1 단계
Use a spudger to pry the fan connector straight up off the logic board. It is useful to twist the spudger axially from beneath the fan cable wires to release the connector. The fan socket and the fan connector can be seen in the second and third pictures. Be careful not to break the plastic fan socket off the logic board as you use your spudger to lift the fan connector straight up and out of its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.
  • Use a spudger to pry the fan connector straight up off the logic board.

  • It is useful to twist the spudger axially from beneath the fan cable wires to release the connector.

  • The fan socket and the fan connector can be seen in the second and third pictures. Be careful not to break the plastic fan socket off the logic board as you use your spudger to lift the fan connector straight up and out of its socket. The layout of the logic board shown in the second picture may look slightly different than your machine but the fan socket is the same.

スパッジャーを使って、ロジックボードからまっすぐファンコネクタをこじ開けます。

スパッジャーをファンケーブルワイヤ下に差し込み、垂直にひねり上げると、コネクタを外しやすくなります。

ファンソケットとファンコネクタは、2番目と3番目の画像に表示しています。 スパッジャーを使ってファンコネクタをソケットからまっすぐ上に持ち上げる際に、プラスチック製のファンソケットをロジックボードから外さないように注意してください。 2番目の画像で見れるロジックボードのレイアウトは、お使いのデバイスとは少し異なる場合がありますが、ファンソケットは同じです。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.