메인 콘텐츠로 스킵하기

1 단계 번역 중

1 단계
Gently insert a spudger along the side of the speaker on the back casing assembly. Pry the speaker off the casing and remove it. The speaker is adhered to the casing with light tape, which may give the speaker light resistance.
  • Gently insert a spudger along the side of the speaker on the back casing assembly. Pry the speaker off the casing and remove it.

  • The speaker is adhered to the casing with light tape, which may give the speaker light resistance.

バックケースアセンブリ上のスピーカー側面沿いにスパッジャーを慎重に差し込みます。ケースからスピーカーを持ち上げて外します。

スピーカーは、薄いテープでケースに留められているため、少し手応えがあるかもしれません。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.