주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 19개에 영향을 미칩니다.

영어
프랑스어

4 단계 번역 중

4 단계
Lift the black plastic faceplate out of the optical bay enclosure. You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure. Reassemble the optical bay enclosure without the faceplate, reusing the original three 3.0 mm Phillips screws to keep it intact.
  • Lift the black plastic faceplate out of the optical bay enclosure.

  • You will no longer need the faceplate or the two Phillips screws that held it in place. Set those parts aside if you ever wish to put the faceplate back into the enclosure.

  • Reassemble the optical bay enclosure without the faceplate, reusing the original three 3.0 mm Phillips screws to keep it intact.

Soulevez la façade en plastique noir hors du boîtier de la baie optique.

Vous n'aurez plus besoin de la façade ni des deux vis Phillips qui la maintiennent en place. Mettez ces deux pièces de côté si vous souhaitez réinstaller la façade dans le boîtier.

Remontez le boîtier de la baie optique sans la façade, en réutilisant les trois vis Phillips 3,0 mm d'origine afin de ne pas l'endommager.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.