주요 콘텐츠로 건너뛰기

iPad 3 4G フロントパネルアセンブリの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 17개에 영향을 미칩니다.

3 단계
iPad 3 4G Front Panel Assembly Replacement: 0 단계, 이미지 2개 중 1개 iPad 3 4G Front Panel Assembly Replacement: 0 단계, 이미지 2개 중 2개
  • Use the flat end of a spudger to loosen the adhesive underneath the digitizer ribbon cable.

  • Pull the digitizer ribbon cable straight out of its sockets on the logic board.

スパッジャーの平面側先端を使って、デジタイザーリボンケーブルの下の接着剤をほぐします。

ロジックボード上のソケットからデジタイザーリボンケーブルをまっすぐ引き抜きます。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.