주요 콘텐츠로 건너뛰기

iPad 3 4G ヘッドホンジャックアセンブリの交換

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 14개에 영향을 미칩니다.

7 단계
iPad 3 4G Headphone Jack Assembly Replacement: 0 단계, 이미지 3개 중 1개 iPad 3 4G Headphone Jack Assembly Replacement: 0 단계, 이미지 3개 중 2개 iPad 3 4G Headphone Jack Assembly Replacement: 0 단계, 이미지 3개 중 3개
  • Remove the following screws from the headphone jack assembly:

  • Five 2.6 mm Phillips #0

  • Two 2.2 mm Wide Head Phillips #00

  • Two 2.6 mm Phillips #00

  • These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid stripping the screw.

ヘッドホンジャックアセンブリから次のネジを外します:

2.6mm #0プラスネジ 5本

2.2mm #00プラスネジ(大) 2本

2.6mm #00プラスネジ 2本

これらのネジは、アルミニウム製フレームに対して斜めになっています。ネジをなめないよう、ネジとドライバーが合わさっているか確認してください。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.