iMac G5 20英寸 A1076 更换后壳

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 15개에 영향을 미칩니다.

안내서로 돌아가기

영어

중국어

1 단계 번역중

1 단계

iMac G5 20" Model A1076 Rear Panel Replacement: 0 단계, 이미지 1개 중 1개

Lay the iMac display-side down on a flat surface (putting a cloth under the screen to protect it from bumps).
Loosen the three Phillips screws securing the rear panel to the iMac.
These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

-	[* black] Lay the iMac display-side down on a flat surface.
+	[* black] Lay the iMac display-side down on a flat surface (putting a cloth under the screen to protect it from bumps).
	[* red] Loosen the three Phillips screws securing the rear panel to the iMac.
	[* icon_caution] These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.