주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

영어
독일어

iPad 5 Wi-Fi Gehäusetasten/Kabel Austausch

안내서 전제 조건

모든 선행 작업 안내서의 번역이 끝나야 이 번역이 완료된 것으로 간주됩니다.

iOpener erhitzen

iPad Air Wi-Fi Touch Screen austauschen

iPad Air(Wifi) LCD Austausch

iPad Air Wi-Fi Frontglas austauschen

안내서 정보

= 완료 = 미완료
    Use this guide to replace the case buttons and ribbon cable in your iPad 5 Wi-Fi. [ … ] '''Warning:'''Be very careful when you isolate the battery isolation method in this guide is outdated, and may result using a battery blocker.''' The battery contacts are easily damaged, resulting in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. board. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.''' components.
    Use this guide to replace the case buttons and ribbon cable in your iPad 5 Wi-Fi. [ … ] '''Warning:'''Be very careful when you isolate the battery isolation method in this guide is outdated, and may result using a battery blocker.''' The battery contacts are easily damaged, resulting in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. board. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.''' components.

      작업중인 해당 device의 특정 부분 또는 부품을 설명하여 주십시오. 예: 배터리

      제목을 작성합니다.

      이 간략한 요약은 검색 결과에서만 볼 수 있습니다.

      독자가 안내서를 파고들기 전에 배경 정보를 알려주십시오.

      안내서 단계

      1 단계

      Klappe den Sicherungsbügel am ZIF Verbinder der Gehäusetasten auf dem Logic Board mit dem flachen Ende des Spudgers hoch.

      2 단계

      Entferne die fünf folgenden Kreuzschlitzschrauben #000:

      3 단계

      Hebe den Einschaltknopf mit der Spitze eines Spudgers aus seinem Sitz im Gehäuse.

      4 단계

      Hebe die Halterung der Lautstärketasten aus ihrem Sitz im Gehäuse, entferne sie aber nicht.

      5 단계

      Schubse die beiden Lautstärketastenabdeckungen mit der Spudgerspitze aus ihrem Sitz im Gehäuse.

      6 단계

      Entferne die Gehäusetasteneinheit.

      7 단계

      Ziehe vorsichtig das Flachbandkabel der Gehäusetasten aus der metallenen Halterung der Lautstärketasten.

      8 단계

      Löse mit Hilfe einer Pinzette den Einschalter aus seiner Plastikhalterung.

      9 단계

      Das Flachbandkabel zu den Tasten ist frei.

      귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.