주요 콘텐츠로 건너뛰기
영어
스페인어
5 단계
Use an iOpener or heat gun and carefully apply heat to the digitizer panel to soften the adhesive that secures it to the frame.
  • Use an iOpener or heat gun and carefully apply heat to the digitizer panel to soften the adhesive that secures it to the frame.

  • Hold the heat gun approximately 8-10 inches from the device and apply heat in a gentle back-and-forth motion.

Usa una pistola de calor para aplicar calor al panel digitalizador para ablandar el adhesivo que lo asegura en el marco.

Mantén la pistola de calor a 20-25 centímetros aproximadamente del dispositivo y aplica el calor con un movimiento suave hacia adelante y hacia atrás.

-[* red] Use a heat gun and carefully apply heat to the digitizer panel to soften the adhesive that secures it to the frame.
+[* red] Use an iOpener or heat gun and carefully apply heat to the digitizer panel to soften the adhesive that secures it to the frame.
[* icon_note] Hold the heat gun approximately 8-10 inches from the device and apply heat in a gentle back-and-forth motion.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.