주요 콘텐츠로 건너뛰기
영어
프랑스어
5 단계
Use an iOpener or heat gun and carefully apply heat to the digitizer panel to soften the adhesive that secures it to the frame.
  • Use an iOpener or heat gun and carefully apply heat to the digitizer panel to soften the adhesive that secures it to the frame.

  • Hold the heat gun approximately 8-10 inches from the device and apply heat in a gentle back-and-forth motion.

Chauffez soigneusement le panneau de la vitre tactile avec un pistolet à air chaud ou avec un iOpener pour ramollir l'adhésif qui le fixe au châssis.

Maintenez le pistolet à air chaud à environ 20-25 cm de l'appareil et effectuez de légers mouvements de va-et-vient.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.