주요 콘텐츠로 건너뛰기
영어
스페인어
6 단계
Work the flat end of a nylon spudger under the digitizer panel. Gently pry the panel up to free it from the adhesive. The phone may be too hot to touch from the heat gun. Allow a moment for it to cool to avoid burning your fingers.
  • Work the flat end of a nylon spudger under the digitizer panel. Gently pry the panel up to free it from the adhesive.

  • The phone may be too hot to touch from the heat gun. Allow a moment for it to cool to avoid burning your fingers.

Trabaja con el extremo plano del spudger de nylon por debajo del panel digitalizador. Suavemente levanta el panel para liberarlo del adhesivo.

El teléfono podría estar muy caliente para ser tocado debido a la pistola de calor. Tómate un momento para permitir que se enfríe y evitar quemarse los dedos.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.