주요 콘텐츠로 건너뛰기

2 단계 번역 중

2 단계
Use a Torx T8 screwdriver to remove the four 15 mm screws with orange circles around them.
  • Use a Torx T8 screwdriver to remove the four 15 mm screws with orange circles around them.

  • Gently pull the IR blaster off the case.

Entferne vier mit orangenen Kreisen markierte 15 mm Torx T8 Schrauben.

Ziehe die Infrarotplatine vorsichtig vom Gehäuse ab.

-[* black] Use a Torx T8 screwdriver to remove the four 15mm screws with orange circles around them.
-[* black] After the screws are removed gently pull the IR blaster off the case.
+[* black] Use a Torx T8 screwdriver to remove the four 15 mm screws with orange circles around them.
+[* black] Gently pull the IR blaster off the case.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.