주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

5 단계
With the LCD lifted, disconnect the LCD cable by pulling down. The LCD cable is attached to the underside of the power supply; be careful where you put your fingers so you don't get zapped by a capacitor.
  • With the LCD lifted, disconnect the LCD cable by pulling down.

  • The LCD cable is attached to the underside of the power supply; be careful where you put your fingers so you don't get zapped by a capacitor.

  • On reassembly, you may find it helpful to remove the power supply, reconnect the LCD power cable, and then reinstall the power supply.

  • Alternatively, the LCD power cable can be disconnected from the LCD, rather than the power supply.

Während das LCD angehoben ist, kannst du das LCD Kabel nach unten abziehen.

Das LCD Kabel ist an der Unterseite des Netzteils angeschlossen. Achte darauf, dass deine Finger keinen elektrischen Schlag von den Kondensatoren erhalten.

Beim Zusammenbau geht es leichter, wenn du das Netzteil erst ausbaust, dann den LCD Versorgungsstecker einsteckst und das Netzteil wieder einbaust.

Eine andere Möglichkeit ist, das LCD Versorgungskabel am LCD abzulösen und nicht am Netzteil.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.