기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 6개에 영향을 미칩니다.

안내서로 돌아가기
영어
프랑스어
5 단계
With the LCD lifted, disconnect the LCD cable by pulling down. The LCD cable is attached to the underside of the power supply; be careful where you put your fingers so you don't get zapped by a capacitor.

  • With the LCD lifted, disconnect the LCD cable by pulling down.

  • The LCD cable is attached to the underside of the power supply; be careful where you put your fingers so you don't get zapped by a capacitor.

  • On reassembly, you may find it helpful to remove the power supply, reconnect the LCD power cable, and then reinstall the power supply.

  • Alternatively, the LCD power cable can be disconnected from the LCD, rather than the power supply.

Pendant que l'écran LCD est soulevé, débranchez le câble LCD en tirant vers le bas.

Le câble LCD est branché au-dessous de la carte d'alimentation. Faites attention lors des manipulations : si vous touchez un condensateur, vous pouvez recevoir une décharge électrique.

Le remplacement de ce câble est l'étape la plus difficile de la réparation. Commencez par connecter le câble puis vissez la carte mère. Notez que le filetage des deux vis qui maintiennent la carte près du disque dur est plus fin que celui des deux autres.

[* black] With the LCD lifted, disconnect the LCD cable by pulling down.
[* icon_caution] The LCD cable is attached to the underside of the power supply; be careful where you put your fingers so you don't get zapped by a capacitor.
[* black] Replacing this cable isicon_reminder] On reassembly, you may find it helpful to remove the hardest part ofpower supply, reconnect the repair. I connect the cableLCD power cable, and then screwreinstall the board down. Note thatpower supply.
[* black] Alternatively, the 2 screws holding the board down closer toLCD power cable can be disconnected from the hard drive have finer threadsLCD, rather than the other 2power supply.
[* black] Replacing this cable isicon_reminder] On reassembly, you may find it helpful to remove the hardest part ofpower supply, reconnect the repair. I connect the cableLCD power cable, and then screwreinstall the board down. Note thatpower supply.
[* black] Alternatively, the 2 screws holding the board down closer toLCD power cable can be disconnected from the hard drive have finer threadsLCD, rather than the other 2power supply.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.