주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

영어
스페인어
5 단계
Slide the opening pick down the side of the phone, separating the adhesive. The display cable is located just above the midpoint on this side, and may interfere with your pick if you pry too deeply.
  • Slide the opening pick down the side of the phone, separating the adhesive.

  • The display cable is located just above the midpoint on this side, and may interfere with your pick if you pry too deeply.

  • Go slowly so that the tip doesn't slip out of the seam. If sliding becomes difficult, reheat and reapply the iOpener.

  • Leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.

Desliza la púa de apertura a lo largo del teléfono separando el adhesivo.

El cable de pantalla está ubicado justo por arriba del punto medio de este lado y podría interferir con tu púa si haces palancas muy profundamente.

Hazlo despacio así la punta no se escapa de la línea. Si el deslizamiento se hace difícil, vuelve a calentar y aplicar el iOpener.

Deja la púa en el lugar y toma una segunda púa mientras procedes al segundo paso. Al dejar la púa insertada puede prevenir que el pegamento que recién separaste se vuelva a adherir.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.