기기를 수리하세요

수리할 권리

상점

안내서로 돌아가기
영어
일본어
5 단계
Slide the opening pick down the side of the phone, separating the adhesive. The display cable is located just above the midpoint on this side, and may interfere with your pick if you pry too deeply.

  • Slide the opening pick down the side of the phone, separating the adhesive.

  • The display cable is located just above the midpoint on this side, and may interfere with your pick if you pry too deeply.

  • Go slowly so that the tip doesn't slip out of the seam. If sliding becomes difficult, reheat and reapply the iOpener.

  • Leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.

開口ピックをデバイス横から下側に向けて、接着剤を切り込みながらスライドします。

右側の中間地点少し上にディスプレイケーブルが搭載されています。ピックを深くまで差し込んでスライドすると引っかかることがあります。

開口ピックの先端が隙間からスリップして飛び出さないように、ゆっくりと丁寧にスライドします。作業が困難な場合はiOpener を再度温めて該当箇所に当ててください。

ピックを下部に残したまま、2枚目の開口ピックを準備して次の手順に進みます。挿入したまま残しておくことで、接着剤が再装着するのを防ぐことができます。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.