주요 콘텐츠로 건너뛰기
영어
스페인어
2 단계
Apply some high concentration (>90%) isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.
  • Apply some high concentration (>90%) isopropyl alcohol under each corner of the battery and allow it to penetrate for several minutes to help weaken the adhesive.

  • The battery adhesive is designed to be loosened with isopropyl alcohol.

  • Alternatively, prepare an iOpener and apply it directly to the battery for at least two minutes. Reheat and reapply the iOpener as needed.

Aplica un poco de alcohol isopropílico concentrado (> 90 %) debajo de cada esquina de la batería y permite que penetre durante varios minutos para ayudar a debilitar el adhesivo.

El adhesivo de la batería esta diseñado para ser disuelto con alcohol isopropilico.

Alternativamente, prepara un iOpener y aplícalo directamente sobre la batería durante al menos dos minutos. Vuelve a calentar y aplicar el iOpener si fuera necesario.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.