주요 콘텐츠로 건너뛰기
영어
스페인어

22 단계 번역 중

22 단계
In order for the adhesive to bond correctly, you'll need to apply even pressure around the perimeter of your iPhone. The camera bump complicates matters, but you can compensate by laying your iPhone face-down and placing coins around the perimeter. As an alternative method, you can use screen vice clamps around the perimeter of your device to set the new adhesive. You can use coins of any denomination, so long as they are as thick or slightly thicker than the camera bump.
  • In order for the adhesive to bond correctly, you'll need to apply even pressure around the perimeter of your iPhone. The camera bump complicates matters, but you can compensate by laying your iPhone face-down and placing coins around the perimeter.

  • As an alternative method, you can use screen vice clamps around the perimeter of your device to set the new adhesive.

  • You can use coins of any denomination, so long as they are as thick or slightly thicker than the camera bump.

  • If your iPhone has a high-gloss finish, such as Jet Black, add a strip of tape around the perimeter to protect the finish before placing any coins.

  • Place a coin at each corner of your iPhone, and place two coins on either side of the camera bump.

  • Place additional coins around the entire perimeter of your iPhone.

  • Using a hair dryer or heat gun, evenly heat the side edges all the way around the iPhone until they are slightly too hot to touch. The heat will help the adhesive form a more complete bond. Don't overheat the iPhone, or you may cause the battery to ignite or damage other heat-sensitive components, like the display.

Para que el adhesivo selle correctamente, tu necesitaras aplicar presión uniforme alrededor del perímetro de tu IPhone. La muesca de la cámara complica el asunto, pero tu puedes compensar apoyando el IPhone mirando hacia abajo y poniendo monedas alrededor del perímetro.

Como un método alternativo, puedes usar grapas de sujeción de tornillo al rededor del perímetro del dispositivo para fijar el nuevo adhesivo

Puedes usar monedas de cualquier denominación, mientras que sean tan gruesas o un poco mas que la muesca de la cámara.

Si tu IPhone tiene un acabado muy brillante, como el Jet Black, agrega una tira de cinta alrededor del perimetro para proteger el acabado antes de poner las monedas.

Pon una moneda en cada esquina de tu IPhone, y pon dos monedas en cada lado de la muesca de la cámara.

Pon monedas adicionales alrededor del perímetro entero de tu IPhone.

Usando un secador de pelo o pistola de calor, calienta uniformemente los costados del IPhone hasta que estén lo suficientemente calientes para tocarlos. El calor ayudara al adhesivo a realizar un sellado mas completo. No sobre calientes el IPhone, o puedes causar que la batería explote o dañar otros componentes sensibles al calor como el display.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.