주요 콘텐츠로 건너뛰기
영어
스페인어

11 단계 번역 중

11 단계
With the amount of double sided tape and glue inside this keyboard, it would be wise to use an iOpener tool or heatgun before beginning to pry open the keyboard. I used a heatgun a bit later into the prying process because I was fearful of melting and deforming the back plastic of the keyboard. Luckily, adjusting the heatgun to its lowest setting activated the glue enough to become pliable.
  • With the amount of double sided tape and glue inside this keyboard, it would be wise to use an iOpener tool or heatgun before beginning to pry open the keyboard.

  • I used a heatgun a bit later into the prying process because I was fearful of melting and deforming the back plastic of the keyboard. Luckily, adjusting the heatgun to its lowest setting activated the glue enough to become pliable.

Con la cantidad de cinta adhesiva de doble cara y pegamento dentro de este teclado, sería conveniente utilizar una herramienta iOpener o una pistola de calor antes de comenzar a abrir el teclado.

Utilicé una pistola de calor un poco más tarde en el proceso de palanca porque temía derretir y deformar el plástico trasero del teclado. Por suerte, ajustar la pistola de calor a su posición más baja activó el pegamento lo suficiente para volverse flexible.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.