주요 콘텐츠로 건너뛰기
영어
프랑스어

Remplacement de l'écran complet de l'iPad Pro 12.9"

안내서 전제 조건

모든 선행 작업 안내서의 번역이 끝나야 이 번역이 완료된 것으로 간주됩니다.

iPad Pro 12.9" Display Assembly Replacement

Remplacement du bouton home de l'iPad Pro 12.9"

안내서 정보

= 완료 = 미완료
Display Assembly
Screen
iPad Pro 12.9" Display AssemblyScreen Replacement
Remove the display assemblyscreen, including the LCD, digitizer, and home button from an iPad Pro 12.9" to replace it or access internal components.
    Follow the steps in this guide to replace the display assemblyscreen in an iPad Pro 12.9", or to access other internal components for servicing.
    Note that the Home Buttonhome button installed in your original display assemblyscreen is paired to the iPad's logic board, and will need to be [guide|95750|removed and transferred to the new display|new_window=true]screen to retain Touch ID functionality.
    '''***Before beginning, check to see if your replacement part has a daughterboard adhered to its back.'''*** If so, this guide will work for you. Otherwise, you will need to transfer the board from the old displayscreen to the new one. Transferring the daughterboard from the original to replacement unit will require specialty microsoldering equipment and we recommend DIY users source a new part rather than attempt the procedure.
    Parts of this guide were shot with a Wi-Fi model and as such the internals may look slightly different from the LTE model. The procedure is the same for both models except where noted.
    '''Warning: the battery isolation method in this guide is outdated, and may result in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components'''
    The opening procedure for this iPad Pro is shown using a Halberd Spudger. If you don’t have one, ***you can use an opening pick instead***—the process is the same.
      To reassemble your device, follow these instructions in reverse order.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow the above steps in reverse order.***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/iPad%20Pro%2012.9%22|Answers community] for troubleshooting help.

      작업중인 해당 device의 특정 부분 또는 부품을 설명하여 주십시오. 예: 배터리

      제목을 작성합니다.

      이 간략한 요약은 검색 결과에서만 볼 수 있습니다.

      독자가 안내서를 파고들기 전에 배경 정보를 알려주십시오.

      안내서 단계

      1 단계

      2 단계

      귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.