주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 9개에 영향을 미칩니다.

영어
스페인어

1 단계 번역 중

1 단계
The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board. Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket. Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply or any of the exposed solder. Touching it risks a high voltage shock from the many large capacitors attached to the board.

  • Use the tip of a spudger to push each side of the power button cable connector and gently walk it out of its socket.

Los siguientes pasos llevan tus manos cerca de la cara expuesta de la fuente de energía. No toques la cara de la fuente de energía o alguna de las soldaduras expuestas. Tocarlas supone el riesgo de recibir una descarga de alto voltaje de alguno de los capacitores de gran tamaño soldados a la placa.

Usa la punta de un spudger para presionar cada lado del conector del cable del botón de encendido para que camine lentamente fuera de su zócalo.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.