주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 12개에 영향을 미칩니다.

영어
스페인어
8 단계
Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Do not let any of the exposed solder joints come in contact with a metal surface, as that can cause a short. Flip the power supply over to access the DC power cable connection behind the logic board.
  • Be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Do not let any of the exposed solder joints come in contact with a metal surface, as that can cause a short.

  • Flip the power supply over to access the DC power cable connection behind the logic board.

  • To disconnect the cable, squeeze the release clip on the back side of the connector, behind the logic board, and pull the connector straight out.

Ten mucho cuidado de no tocar los pines de los capacitores o cualquier soldadura expuesta en la parte trasera de la fuente de energía. Sólo maneja la placa por los bordes.

No dejes que ninguna de las soldaduras expuestas entren en contacto con una superficie metálica, pueden causar un cortocircuito.

Voltea la fuente de energía para acceder a la conexión del cable de corriente directa (CD) detrás de la placa lógica.

Para desconectar el cable, presiona el clip de liberación en el lado trasero del conector, detrás de la placa lógica, y tira del conector hacia afuera.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.