주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 12개에 영향을 미칩니다.

영어
스페인어
9 단계
You may find it helpful to set the iMac down on its back for the next couple of steps. Use the flat end of a spudger to press the release clip on the side of the AC inlet cable connector inward. While pressing on the release clip with the spudger, grasp the AC inlet cable, and pull the connector straight out of its socket.
  • You may find it helpful to set the iMac down on its back for the next couple of steps.

  • Use the flat end of a spudger to press the release clip on the side of the AC inlet cable connector inward.

  • While pressing on the release clip with the spudger, grasp the AC inlet cable, and pull the connector straight out of its socket.

Puede que encuentres de ayuda apoyar el iMac sobre su parte trasera para el siguiente par de pasos.

Usa la punta plana de un spudger para presionar el clip de liberación en el lado del conector del cable de entrada de corriente alterna (CA) hacia adentro.

Mientras presionas el clip de liberación con el spudger, agarra el cable de entrada de CA, y tira el conector fuera de su zócalo.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.