주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 13개에 영향을 미칩니다.

3 단계 번역 중

3 단계
Lift the display up from the frame and remove it from the iMac. It may be necessary to slowly lift from one side to peel against the remaining adhesive. Be very careful handling the display—it's big, heavy, and made of glass.
  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

ディスプレイをフレームから持ち上げて、iMacより取り出します。

片側からゆっくりと持ち上げて、残っている接着剤を剥がしてください。

ディスプレイの取り扱いは特にご注意くださいー重量があり、大きく、ガラス製です。

接着剤が切開できたら、古い接着ストリップはディスプレイを固定するために再利用することはできません。このガイドに従って、接着ストリップを交換して、リアエンクロージャーとディスプレイを固定してください。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.