주요 콘텐츠로 건너뛰기
영어
중국어

iPad Air 2 LTE 显示组件更换

안내서 전제 조건

모든 선행 작업 안내서의 번역이 끝나야 이 번역이 완료된 것으로 간주됩니다.

加热iOpener

iPad Air 2 Wi-Fi 前面板拆解程序

iPad Air 2 Wi-Fi版屏幕组件的更换

iPad Air 2 Wi-Fi屏幕组件的更换

안내서 정보

= 완료 = 미완료
    Follow this guide to replace a broken front panel assembly on an iPad Air 2 LTE. The front panel or display assembly consists of the glass digitizer on top and the fused LCD underneath. In the iPad Air 2, these two parts are not separable and must be replaced as one piece.
    Note that the fingerprint scanner in the home button is paired to the iPad's logic board. In order to maintain Touch ID functionality, you must transfer your original home button to the new display assembly.
    This process can fix issues like a cracked glass digitizer, a non-responsive touchscreen, or a broken LCD screen.
    Parts of this guide were shot with a Wi-Fi model and as such the internals may look slightly different from the LTE model. The procedure is the same for both models except where noted.
    '''Warning: the battery isolation method in this guide is outdated, and may result in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.'''

      작업중인 해당 device의 특정 부분 또는 부품을 설명하여 주십시오. 예: 배터리

      제목을 작성합니다.

      이 간략한 요약은 검색 결과에서만 볼 수 있습니다.

      독자가 안내서를 파고들기 전에 배경 정보를 알려주십시오.

      안내서 단계

      귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.