주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 25개에 영향을 미칩니다.

11 단계 번역 중

11 단계
Carefully close the MacBook and flip it over once again, so that the Apple logo faces up. Lifting from the front edge, raise the upper case/display assembly to about a 90° angle, and prop it up against something sturdy so you don't have to hold it. Add a piece of tape near the track pad to secure the upper case and prevent accidental movement.
  • Carefully close the MacBook and flip it over once again, so that the Apple logo faces up.

  • Lifting from the front edge, raise the upper case/display assembly to about a 90° angle, and prop it up against something sturdy so you don't have to hold it.

  • Add a piece of tape near the track pad to secure the upper case and prevent accidental movement.

  • It's possible to open the MacBook all the way and lay both sides down flat, but this may damage the flex cables and is not recommended.

Appleのロゴが上向きになるように、慎重にMacBookを閉じてもう一度裏返します。

前端から起こして、上部ケース/ディスプレイアセンブリを約90度の角度まで持ち上げ、 手で固定する必要がないように、安定した頑丈な衝立に立てかけます。

上部ケースを固定するためトラックパッドの近くにテープを貼り、不用意な動きを防ぎます。

MacBookを完全に開き、両側を水平に配置することもできます。しかし、この状態の場合、フレックスケーブルが損傷する可能性があるため、お勧めしません。

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.