주요 콘텐츠로 건너뛰기

Retina MacBook 2016 Apertura de la carcasa inferior

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 25개에 영향을 미칩니다.

영어
스페인어
5 단계
Retina MacBook 2016 Opening Lower Case Assembly: 0 단계, 이미지 3개 중 1개 Retina MacBook 2016 Opening Lower Case Assembly: 0 단계, 이미지 3개 중 2개 Retina MacBook 2016 Opening Lower Case Assembly: 0 단계, 이미지 3개 중 3개
  • Use the flat end of a spudger to press and hold the small gold 'battery disconnect' button.

  • If the power LED is lit up, continue holding the button until the LED goes dark, and then release. This may take up to 10 seconds.

  • If the LED does not light, release the button after 5-10 seconds. Press and hold it again for 5-10 seconds, and release. Finally, press and hold it a third time for 5-10 seconds, and release.

  • This step ensures the MacBook is fully powered down and safe to work on.

Usa la parte plana de la spudger para presionar y mantener el pequeño botón dorado 'desconectar batería'.

Si el LED de poder está encendido, continua presionando el botón hasta que el LED se apague por completo, y luego suelta el botón. Esto puede tomar unos 10 segundos.

Si el LED no se ilumina, suelta el botón después de 5 a 10 segundos. Presiona y mantén otra vez por 5 a 10 segundos, luego sueltas. Finalmente, presiona y mantén por tercera vez de 5 a 10 segundos, y suelta.

Este paso asegura que la MacBook está totalmente apagada y es seguro trabajar en ella.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.