주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 19개에 영향을 미칩니다.

3 단계
Peel back any tape covering the keyboard ribbon cable connector.
  • Peel back any tape covering the keyboard ribbon cable connector.

Klappe mit dem flachen Ende eines Spudgers die Halteklappe an der ZIF-Buchse des Tastatur-Flachbandkabels nach oben.

Vergewissere dich, dass du den Hebel nicht an der Buchse selbst, sondern an der Halteklappe ansetzt.

Verwende das flache Ende eines Spudgers, um das Tastatur-Flachbandkabel aus der Buchse zu ziehen.

-[* black] Use the flat end of a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
-[* icon_caution] Be sure you are prying up on the hinged retaining flap, ***not*** the socket itself.
-[* black] Use the flat end of a spudger to pull the keyboard ribbon cable out of its socket.
+[* black] Peel back any tape covering the keyboard ribbon cable connector.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.