주요 콘텐츠로 건너뛰기

MacBook Pro 15" Retina Display Mid 2012 로직 보드 어셈블리 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 19개에 영향을 미칩니다.

11 단계
MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: 0 단계, 이미지 3개 중 1개 MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: 0 단계, 이미지 3개 중 2개 MacBook Pro 15" Retina Display Mid 2012 Logic Board Assembly Replacement: 0 단계, 이미지 3개 중 3개
  • Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro.

  • Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board.

  • When reinstalling the logic board, check the cables at the marked locations to make sure they don't get pinned underneath the logic board.

  • Clockwise from top: keyboard, trackpad, battery, right speaker, keyboard backlight, display, microphone, headphone jack, left speaker.

배터리와 가장 가까운 쪽을 들어 올려 로직 보드를 MacBook Pro의 상단으로 돌리세요.

스퍼저의 납작한 끝을 사용하여 로직 보드 하단의 소켓에서 MagSafe 2 커넥터를 조심히 밀어 주세요.

로직 보드를 다시 설치할 때 표시된 위치에서 케이블이 로직 보드 아래에 끼이지 않았는지 확인하세요.

위쪽에서 시계 방향: 키보드, 트랙패드, 배터리, 오른쪽 스피커, 키보드 백라이트, 디스플레이, 마이크, 헤드폰 잭, 왼쪽 스피커.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.