주요 콘텐츠로 건너뛰기
8 단계
So far so good. We pull out the standard Force Touch sensor/gasket, equipped with the same Analog Devices AD7149 capacitance sensor controller that we found in the Series 2. Continuing our parts-picking spree, we pluck out the Taptic Engine, seemingly unchanged from watches  yore. Then out pops the antenna array, including what we believe to be the GPS antenna.
  • So far so good. We pull out the standard Force Touch sensor/gasket, equipped with the same Analog Devices AD7149 capacitance sensor controller that we found in the Series 2.

  • Continuing our parts-picking spree, we pluck out the Taptic Engine, seemingly unchanged from watches yore.

  • Then out pops the antenna array, including what we believe to be the GPS antenna.

到目前为止一切都好,我们取出了支撑Forch Touch功能的传感器/垫片,上面带有我们在Series 2上曾经看到过的亚德诺半导体(Analog Devices)AD7149电容传感控制芯片

继续我们的零件采摘工作,我们拆出了Taptic Engine,和曾经版本并无变化

然后拿出天线阵列,其中包括我们所认为的GPS天线

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.