주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

영어
프랑스어
3 단계
Now the Test Frequency needs to be changed to 10KHz.
  • Now the Test Frequency needs to be changed to 10KHz.

  • Press the Navigation button again, and select MEASURE. Then SETTING, then T.FREQ. Select 10KHz.

  • The number on the screen that appears is the capacitance between the two tweezer tips at their default distance. This is the Capacitance Offset.

  • The offset is varied by the distance between the tips. The smaller the component, the closer the tips are together, thus a higher offset evaluation.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.