주요 콘텐츠로 건너뛰기
영어
이탈리아어
4 단계
To store the offset so Smart Tweezers can automatically deduce it from measurements, first, enter the menu, select MODE, and set the device to manual CAP measurement. Then select HOLD Set the tweezer tips apart to a distance equal to the component to be measured. This is the offset.
  • To store the offset so Smart Tweezers can automatically deduce it from measurements, first, enter the menu, select MODE, and set the device to manual CAP measurement.

  • Then select HOLD

  • Set the tweezer tips apart to a distance equal to the component to be measured. This is the offset.

  • Enter the NULL menu, and select SET.

  • An asterisk will appear beside the test mode indicator while measuring to indicate an offset has been stored.

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.