주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

3 단계
After the edges of the battery are loosened, begin prying up the edge of the logic board. Start at the top and work your way down the side of the board. To prevent bending/breaking the logic board, do not try to remove the logic board, yet. The dock connector is still embedded in the frame. Again, you are only trying to loosen more of the adhesive.
  • After the edges of the battery are loosened, begin prying up the edge of the logic board. Start at the top and work your way down the side of the board.

  • To prevent bending/breaking the logic board, do not try to remove the logic board, yet. The dock connector is still embedded in the frame. Again, you are only trying to loosen more of the adhesive.

Wenn die Kanten des Akkus gelöst sind, kannst du anfangen, die Kante des Logic Boards hochhebeln. Beginne oben und arbeite dich an der Seite des Boards nach unten.

Damit das Logic Board sich nicht verbiegt oder bricht, darfst du es jetzt noch nicht entfernen. Der Dockanschluss ist immer noch im Rahmen eingebettet. Auch jetzt sollst du nur noch mehr Kleber lösen.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.